Ideas

Window Grille Design in the Philippines: 6 Steel Matting Ideas for Homes, Shops and Offices

By Una Wire Products Inc. ·November 2026 ·5 min read
Quick Answer

Can you make a window grille from steel matting?
Yes. Cut a steel matting panel to the window opening, weld it into an angle bar or flat bar frame, and fix the frame to the wall. For most homes use 2×2 inch mesh in 3.0 to 4.5 mm wire, galvanized or well painted. Use 1×1 inch mesh for shops and stockrooms where you want a tighter grid. A grille deters, it does not make a window break-in proof, and at least one window in each bedroom should open from the inside in an emergency.

Looking for a window grille that is strong, lets light and air through and costs less than a bar-and-pattern grille? A frame with steel matting infill is a simple option. This page shows six grille ideas for homes, shops and offices, which mesh and wire suit each one, what the matting costs, and what to tell us so we can supply the panel. We make the matting. The frame, anchors and welding come from your welder or fabricator.

Illustration of four steel matting window grilles: fixed grille, hinged grille, tight-mesh vent grille and decorative grille with flat bar pattern
Four ways to use steel matting in a window grille (illustration).

6 Steel Matting Window Grille Ideas

1. Fixed window grille

The simplest grille: a matting panel welded into a flat bar or angle frame and bolted into the wall around the window. Make the panel about 2 cm smaller than the frame opening so it can be welded in. One 4×8 ft sheet (1.22 m × 2.44 m) cuts two panels of about 1.0 × 1.2 m, enough for two standard windows. Use 3.0 to 4.5 mm wire in 2×2 inch mesh.

2. Hinged grille with an inside latch

A hinged panel opens like a door so people can leave through the window in a fire. Weld the hinges to one side of the frame and fit a latch you can reach from inside. Check that the window and grille open wide enough to climb through. This is the better choice for bedroom and ground floor windows.

3. Tight-mesh vent and stockroom grille

For a shop vent, a warehouse window or a stockroom, a 1×1 inch mesh (₱1,250 to ₱2,550 per 4×8 ft sheet in black iron, October 2026) leaves little to grip and keeps out hands and larger pests. It costs more per sheet, so use it only where you need it. See our anti-climb fence for the tight-mesh panel.

4. Decorative grille with a flat bar pattern

Weld flat bar in a diamond, cross or curve over the mesh and paint the frame in a feature colour. The matting gives the strength, and the pattern gives the look. Keep the pattern simple so it can be painted and repainted easily.

5. Aircon outdoor unit cage

A mesh cage around an outdoor aircon unit keeps it from being stolen or hit by a ball. Use 2×2 inch mesh in 3.0 to 4.5 mm galvanized wire, leave the sides open enough for good air flow, and fit a hinged or removable panel so a technician can reach the unit. Ask your aircon installer about the clearance the unit needs.

6. Balcony and stair opening guard

A matting panel set in a frame can fill an opening under a handrail or across a stair opening so small items and small children cannot fall through. The handrail, posts and fixings carry the load, so have them designed by your fabricator or engineer. The mesh is only the infill.

Which Mesh and Wire for a Grille?

GrilleMesh openingWireNotes
Fixed home window2×2 inch3.0 – 4.5 mmBolt the frame into masonry
Hinged grille2×2 inch3.0 – 3.5 mmLatch reachable from inside
Shop or stockroom vent1×1 or 2×2 inch2.6 – 4.0 mmTight mesh costs more per sheet
Decorative grille2×2 inch3.0 – 3.5 mmFlat bar pattern over the mesh
Aircon unit cage2×2 inch3.0 – 4.5 mmGalvanized, keep air flow clear
Balcony or stair opening2×2 inch3.5 – 4.5 mmFrame and fixings by fabricator or engineer

These are design suggestions, not engineering specifications. Ask your fabricator to confirm frame size and anchors for your wall. See the wire mesh gauge guide.

What the Matting Costs for a Grille

Only the matting is priced here. Using our October 2026 pick-up prices for 2×2 inch black iron unless stated:

GrilleSheet usedMatting, black ironMatting, galvanized
Two windows 1.0 × 1.2 m, 3.5 mmOne 4×8 ft sheet, cut in two₱534about ₱641 – ₱721
Two windows 1.0 × 1.2 m, 4.5 mmOne 4×8 ft sheet, cut in two₱803about ₱964 – ₱1,084
Aircon unit cage about 0.9 × 0.8 × 0.4 m, 3.0 mmOne 4×8 ft sheet, cut₱450about ₱540 – ₱608
Shop vent panels, 1×1 inch, 2.6 mmOne 4×8 ft sheet₱1,250Ask for a quote

The frame, anchors, hinges, latch, paint or galvanizing and welding labour are extra, and they are usually most of the grille cost. Galvanizing adds about 20 to 35%. For other gauges, see the steel matting price list.

Tips for Building a Better Grille

  • Frame first, matting second. Measure the opening, build the frame, then cut the matting to fit inside it. We make custom sheet sizes, so you can order the panel at the size you need. See custom steel matting.
  • Anchor it properly. A grille is only as strong as its fixings. Use expansion bolts or lugs set in the masonry, and do not rely on a thin window frame.
  • Plan the way out. Keep at least one openable window or grille in each bedroom, so people can leave in a fire.
  • Hide the cut ends. Border the panel with flat bar or angle, and paint or galvanize any cut edge of black iron matting.
  • Use galvanized outdoors. Black iron rusts quickly in rain and humidity. See galvanized vs black iron.
  • Check building rules. Some subdivisions and condominiums restrict grilles on the front or street side.

Frequently Asked Questions

Can steel matting be used for a window grille?

Yes. Weld a steel matting panel into a flat bar or angle frame and fix the frame to the wall around the window.

What mesh size is best for a window grille?

For most homes, 2×2 inch mesh in 3.0 to 4.5 mm wire. Use 1×1 inch mesh for shops, stockrooms and vents where you want a tighter grid.

Is a steel matting window grille burglar-proof?

No grille is burglar-proof. Heavier wire, a strong frame and good anchors make it harder to defeat, and a light panel in a thin frame is easy to defeat. Ask your fabricator about the frame and anchors.

Can you cut steel matting to the size of my window?

We make custom sheet sizes. Send us the width and height of the panel you need. You can also cut standard sheets yourself, then paint or galvanize the cut edges.

Do you make and install the grille?

We make and supply the steel matting. Ask your welder or fabricator for the frame, anchors and installation.

See also the gate design ideas, the thickness chart, steel matting fence guide and all steel matting uses.

Send us your window size, we quote the panel

Tell us the window width and height, the mesh opening, the wire thickness and whether you want black iron or galvanized. We will reply with the price and what is in stock.

Get a Free Quote →
Need steel matting? Una Wire Products Inc. manufactures to standard and custom sizes. Request a free quote →

Where to next?

Ready to order? Get a quote or call (02) 8260-0181.

Viber