Specs

Steel Matting Thickness in the Philippines: #8, #6 and ¼ Inch in mm

By Una Wire Products Inc. ·November 2026 ·4 min read
Quick Answer

What is steel matting #8, #6 and ¼ inch in mm?
In hardware naming, #8 is 3.0 mm, #6 is 4.5 mm and ¼ inch is 6.0 mm. We also make 2.6, 3.5 and 5.5 mm. For a 2×2 inch, 4×8 ft sheet in black iron (October 2026, pick-up in Quezon City) the price runs from ₱318 at 2.6 mm to ₱1,650 at 6.0 mm. Thickness here means the diameter of the wire, not the sheet.

Hardware stores quote steel matting by a number (#6, #8), a fraction (¼) or a gauge, while engineers write the wire diameter in millimeters. That is why the same sheet can be asked for in three different ways. This page puts them side by side with the price of each thickness, so you can match a hardware name or a drawing to the right sheet.

Steel Matting Thickness Chart: Hardware Name, mm and Price

The prices are for a 2×2 inch mesh, 4×8 ft sheet in black iron, per sheet, as of October 2026, pick-up at our Quezon City factory. The right-hand column is the usual use for each thickness.

Wire thickness Hardware name Price per 4×8 sheet Typical use
2.6 mm—₱318Light reinforcement, non-structural
3.0 mm#8₱450Light residential slabs
3.5 mm—₱534Standard residential floor slabs
4.5 mm#6₱803Commercial floors, driveways
5.5 mm—₱1,122Roads, industrial floors
6.0 mm¼ inch₱1,650Heavy industrial, road base

Not every thickness is always in stock, so call (02) 8260-0181 to confirm before you order. Galvanizing adds about 20 to 35%.

Do Not Convert #6 or #8 with a Wire Gauge Chart

The hardware names #6 and #8 do not follow standard wire gauge tables. A table for American wire gauge, for example, gives 8 gauge as about 3.3 mm, while hardware #8 steel matting is 3.0 mm. Names also vary between suppliers. The safe way to order is to give the diameter in millimeters and check it against the chart above.

Which Thicknesses Come in Which Mesh Size

The thinnest and thickest wire are not made in every mesh. For black iron 4×8 ft sheets, the range for each opening is:

Mesh openingWire thickness availablePrice range per sheet
1×1 inch2.6 – 4.0 mm₱1,250 – ₱2,550
2×2 inch2.6 – 6.0 mm₱318 – ₱1,650
4×4 inch2.6 – 4.5 mm₱450 – ₱950
6×6 inch2.6 – 3.5 mm₱450 – ₱750

Thickness Prices for the 6×20 ft Sheet

The large 6×20 ft sheet (6 ft × 6 m) in 2×2 inch mesh is cheaper per square meter for big floors. Black iron, per sheet, October 2026:

Wire thicknessPrice per 6×20 sheet
2.6 mm₱1,122
3.5 mm₱1,871
4.5 mm (#6)₱2,910
5.5 mm₱4,238
6.0 mm (¼ inch)₱5,450

How to Choose a Thickness

  • Start from the drawing. If your engineer gave a wire diameter, order that diameter. Do not substitute a thinner wire to save cost.
  • No drawing yet? Most residential floor slabs use 3.0 to 3.5 mm wire in a 2×2 inch mesh. Commercial floors and driveways usually step up to 4.5 mm. Roads and industrial floors use 5.5 to 6.0 mm. Always confirm the required size with your structural engineer.
  • Check outdoor exposure. Black iron is for steel buried in concrete. For fences and exposed use, ask for galvanized, which costs about 20 to 35% more.
  • Count sheets after you pick the thickness. Use the steel matting calculator guide to turn your floor area into a number of sheets.

Frequently Asked Questions

What is steel matting #6 in mm?

Hardware #6 steel matting is 4.5 mm wire. It is used for commercial floors and driveways. A 2×2 inch, 4×8 ft sheet in black iron costs ₱803 (October 2026, pick-up).

What is steel matting #8 in mm?

Hardware #8 steel matting is 3.0 mm wire, used for light residential slabs. A 2×2 inch, 4×8 ft sheet in black iron costs ₱450 (October 2026, pick-up).

What is ¼ inch steel matting in mm?

¼ inch steel matting is 6.0 mm wire, the heaviest we make. It is used for heavy industrial floors and road base. A 2×2 inch, 4×8 ft sheet in black iron costs ₱1,650 (October 2026, pick-up).

How thick should steel matting be for a floor slab?

Most residential floor slabs use 3.0 to 3.5 mm wire in a 2×2 inch mesh. Commercial floors and driveways commonly use 4.5 mm. Confirm the required diameter with your structural engineer.

How much is 4.5 mm steel matting?

A 2×2 inch, 4×8 ft sheet of 4.5 mm black iron steel matting costs ₱803 (October 2026, pick-up in Quezon City). The 6×20 ft sheet in the same wire costs ₱2,910. Galvanizing adds about 20 to 35%.

Is steel matting gauge the same as thickness?

For steel matting, "thickness" is the diameter of the wire. Gauge and number names such as #6 and #8 are hardware names that map to a diameter in millimeters, and they vary between suppliers, so always confirm the diameter in mm when you order.

See also the steel matting sizes guide, the full price list and the wire mesh gauge guide.

Tell us the thickness, we quote the sheet

Send us the wire diameter in mm (or the hardware name), the mesh opening, the sheet size and how many you need. We'll reply with the price and what is in stock.

Get a Free Quote →
Need steel matting? Una Wire Products Inc. manufactures to standard and custom sizes. Request a free quote →

Where to next?

Ready to order? Get a quote or call (02) 8260-0181.

Viber