Can you use steel matting for pergolas and decorative fence panels?
Yes. A matting panel in a wood, bamboo or steel frame makes a framed fence panel, a privacy screen or a pergola roof that vines can climb. Use 2×2 inch mesh in 2.6 to 3.5 mm wire for screens and panels, and 4×4 inch for a pergola roof. Choose galvanized or paint it, and match the frame to the house. For the main perimeter fence, see our steel matting fence guide.
Looking for a fence panel or pergola that looks good, lets air and light through and does not need much upkeep? Steel matting gives you a strong grid that you can frame in wood, bamboo or steel, paint to match your house, and train vines over. This page shows seven design ideas, which mesh and wire suit each one, what the matting costs, and what to tell us so we can supply the panels. We make the matting. The frames and posts come from you or your carpenter or welder.
7 Steel Matting Pergola and Decorative Fence Ideas
1. Framed fence panel between posts
A matting panel set in a wood or steel frame between posts, with a concrete or hollow-block base. The frame gives the look, and the mesh gives the strength. A 4×8 ft sheet is 1.22 m wide, so 1.22 m modules are easy to repeat along a fence.
2. Hollow-block base with a mesh top
A hollow-block wall 60 to 90 cm high, topped with a matting panel to about 1.8 m. The block gives privacy low down, and the mesh lets light and air through above. See the steel matting fence guide for the full fence.
3. Pergola roof for climbing plants
A 6×20 ft sheet (1.83 m × 6 m) laid across a steel or wood frame covers a pergola roof of about 3 × 3 m. Vines such as bougainvillea or ampalaya climb the 4×4 inch grid and give shade. Use galvanized mesh and a strong frame, because wet vines are heavy.
4. Privacy screen with slats
Weave or fix wood, bamboo or aluminium slats through 2×2 inch mesh to make a screen that blocks the view but not the air. Use it beside a terrace, an outdoor shower or the aircon units.
5. Bamboo-framed rustic fence
Bamboo or wooden poles as the frame with matting as the infill give a rustic look for a farm, resort or garden. Use galvanized mesh so the metal outlasts the bamboo, and treat the bamboo against pests.
6. Balcony and terrace railing infill
Matting inside a steel frame under a handrail fills the gap so small items and small children cannot fall through. The handrail, posts and fixings must be designed by your fabricator or engineer. The mesh is only the infill.
7. Carport and patio side screen
A mesh panel along the side of a carport or patio keeps the side open for air while keeping balls and animals out. Add climbing plants for shade, and use galvanized mesh for the rain.
Which Mesh and Wire for a Pergola or Panel?
| Design | Mesh opening | Wire | Notes |
|---|---|---|---|
| Framed fence panel | 2×2 inch | 2.6 – 3.0 mm | Match the frame colour to the house |
| Block base with mesh top | 2×2 inch | 2.6 – 3.0 mm | Posts set in concrete |
| Pergola roof | 4×4 inch | 2.6 – 3.0 mm | 6×20 ft sheet, strong frame |
| Privacy screen | 2×2 inch | 2.6 – 3.0 mm | Slats woven through the mesh |
| Bamboo-framed fence | 2×2 or 4×4 inch | 2.6 – 3.0 mm | Galvanized |
| Railing infill | 2×2 inch | 3.0 – 3.5 mm | Railing by fabricator or engineer |
| Carport or patio screen | 2×2 or 4×4 inch | 2.6 – 3.0 mm | Galvanized, good for vines |
These are design suggestions, not engineering specifications. Ask your fabricator or engineer to confirm frames, posts and railings. See the wire mesh gauge guide.
What the Matting Costs
Only the matting is priced here. Using our October 2026 pick-up prices for black iron:
| Design | Sheet used | Matting, black iron | Matting, galvanized |
|---|---|---|---|
| Two fence panels 1.22 × 1.22 m, 2×2 inch, 2.6 mm | One 4×8 ft sheet, cut in two | ₱318 | about ₱382 – ₱429 |
| Privacy screen 1.22 × 2.44 m, 2×2 inch, 3.0 mm | One 4×8 ft sheet | ₱450 | about ₱540 – ₱608 |
| Pergola roof 3 × 3 m, 4×4 inch, 2.6 mm | One 6×20 ft sheet | from ₱617 | about ₱740 – ₱833 |
| Pergola roof 3 × 3 m, 2×2 inch, 2.6 mm | One 6×20 ft sheet | ₱1,122 | about ₱1,346 – ₱1,515 |
Frames, posts, concrete, slats, paint or galvanizing and labour are extra. Galvanizing adds about 20 to 35%. For other gauges, see the steel matting price list.
Tips for a Better Pergola or Panel
- Choose the frame first. Pick the frame material and colour, then order the matting to fit inside it. We make custom sheet sizes. See custom steel matting.
- Make the posts strong. A panel or pergola loaded with vines and wet leaves catches wind and weight. Set posts in concrete.
- Use galvanized outdoors. See galvanized vs black iron. If you use black iron, prime and paint it, and repaint when the paint wears off.
- Hide the cut ends. Border the panel with flat bar, wood or bamboo so there are no sharp wire ends.
- Think about shade and rain. A mesh pergola gives shade only once plants cover it. Add a roof sheet over a seating area if you want rain cover.
Frequently Asked Questions
Can steel matting be used for a pergola?
Yes. Lay a steel matting sheet across a steel or wood frame. 4×4 inch mesh in 2.6 to 3.0 mm wire is a good grid for climbing plants.
What mesh is best for a decorative fence panel?
2×2 inch mesh in 2.6 to 3.0 mm wire, set in a wood, bamboo or steel frame.
Should a pergola panel be galvanized or black iron?
Galvanized for any panel exposed to rain. If you use black iron, prime and paint it well and repaint when the paint wears off.
Can you cut steel matting to the size of my frame?
We make custom sheet sizes. Send us the width and height of the panels you need.
Do you make the frames and posts?
We make and supply the steel matting. Ask your carpenter or welder for the frame, posts and installation.
See also the steel matting fence guide, gate design ideas, garden trellis ideas and all steel matting uses.
Send us your panel size, we quote the matting
Tell us the panel width and height, the mesh opening, the wire thickness and whether you want black iron or galvanized. We will reply with the price and what is in stock.
Get a Free Quote →