Ideas

Machine Guard and Wire Mesh Partition Ideas in the Philippines: 6 Steel Matting Designs for Factories and Warehouses

By Una Wire Products Inc. ·November 2026 ·5 min read
Quick Answer

Can you make machine guards and partitions from steel matting?
Yes. Frame steel matting panels in angle bar or square tube and fix them to the floor or to each other. Use 2×2 inch mesh in 3.0 to 4.5 mm wire for most partitions and guards. A 4×8 ft sheet stood on end makes a panel 2.44 m high, a common partition height. The guard layout, the mesh opening and the distance from moving parts should be set by your safety officer or engineer, not by the mesh alone.

Looking for a partition, guard or storage cage that lets people see through, lets air and light pass and goes up fast? Steel matting panels in a steel frame are a common answer in factories, workshops and warehouses. This page shows six ideas, which mesh and wire suit each one, what the matting costs, and what to tell us so we can supply the panels. We make the matting. The frames, posts and fixings come from your fabricator.

Illustration of four steel matting designs for factories: machine guard, warehouse partition, locked tool crib and belt guard
Four ways to use steel matting in a factory or warehouse (illustration).

6 Steel Matting Guard and Partition Ideas

1. Machine guard panels

Panels around a press, saw, grinder or conveyor drive keep hands and loose items away from moving parts while the operator can still see the machine. Make the panels removable so maintenance can reach it, with a bolted or latched access door. A 4×8 ft sheet cuts two 1.22 × 1.22 m panels. Your safety officer decides the maximum opening and the distance from the moving parts.

2. Floor-to-ceiling warehouse partition

Separates a stockroom, packing area or cage from the open warehouse and lets lighting and air through. Stand 4×8 ft sheets on end (2.44 m high), frame them and bolt the frames together every 1.2 m. Fix the posts to the slab, and add a mesh or sheet roof if you need a locked cage.

3. Tool crib or locked storage cage

A mesh cage keeps tools, spare parts or valuable stock under lock while staff can see inside. Use a hinged door with a hasp and padlock, and 2×2 inch mesh in 3.0 mm wire or heavier. For small parts use 1×1 inch mesh so nothing can be pulled through.

4. Belt, pulley and fan guard

A curved or box guard over a belt drive or fan stops hands and clothing getting in. 2×2 inch mesh in 2.6 to 3.0 mm wire is easy to form, and the guard must come off for belt changes. Keep air flow clear for motors and fans.

5. Pallet rack back and side panels

A mesh panel fixed to the back or sides of a pallet rack stops boxes falling into the aisle or onto people on the other side. Cut panels to the bay size and bolt or clip them to the uprights. Check with the rack supplier that adding panels is allowed for the rack.

6. Platform and mezzanine edge infill

Under a handrail on a mezzanine, loading dock or work platform, matting panels act as infill so tools and small items cannot fall through. The handrail, posts and fixings must be designed by your engineer or fabricator. The mesh is only the infill.

Which Mesh and Wire for a Guard or Partition?

UseMesh openingWireNotes
Machine guard2×2 or 1×1 inch2.6 – 3.0 mmRemovable, opening set by safety officer
Warehouse partition2×2 inch3.0 – 4.5 mmFrame every 1.2 m
Locked storage cage2×2 or 1×1 inch3.0 – 4.0 mmHasp and padlock door
Belt, pulley or fan guard2×2 inch2.6 – 3.0 mmRemovable, keep air flow clear
Rack back panel2×2 inch2.6 – 3.0 mmCheck the rack rating
Platform infill2×2 inch3.0 – 3.5 mmUnder an engineered handrail

These are design suggestions, not safety or engineering specifications. Your safety officer or engineer sets guard distances, opening sizes and loads. See the wire mesh gauge guide.

What the Matting Costs

Only the matting is priced here. Using our October 2026 pick-up prices for 2×2 inch black iron:

ItemSheets usedMatting, black ironMatting, galvanized
Two machine guard panels 1.22 × 1.22 m, 3.0 mmOne 4×8 ft sheet, cut in two₱450about ₱540 – ₱608
Partition 6 m long × 2.44 m high, 3.0 mmFive 4×8 ft sheets on end₱2,250about ₱2,700 – ₱3,040
Same partition in 4.5 mmFive 4×8 ft sheets on end₱4,015about ₱4,818 – ₱5,420
Locked cage 3 × 3 m, walls 2.44 m high, 3.0 mmTen 4×8 ft sheets on end₱4,500about ₱5,400 – ₱6,080

Frames, posts, doors, locks, fixings, paint or galvanizing and welding labour are extra, and they are usually most of the cost. Galvanizing adds about 20 to 35%. For other gauges, see the steel matting price list.

Tips for Building Better Guards and Partitions

  • Ask your safety officer first. They set the opening size, the distance from moving parts and how the guard opens.
  • Frame every panel. A bare matting edge is sharp and bends. A flat bar or angle border keeps the panel stiff and hides the cut ends.
  • Anchor to the floor. Bolt posts into the slab so the partition does not rock when it is bumped by a forklift or a pallet.
  • Leave access. Fit a door or a removable panel wherever someone has to reach a machine, a meter or a switch.
  • Make it visible. Paint guards a bright colour, such as yellow, so they are easy to see.
  • Galvanized for wet or outdoor areas. See galvanized vs black iron.

Frequently Asked Questions

Can steel matting be used as a machine guard?

Yes, as the infill of a guard frame. The opening size, the guard distance and the way it opens should be set by your safety officer or engineer.

What mesh opening is right for a machine guard?

There is no single answer. It depends on the machine and the distance to the moving part, and your safety officer sets it. We make 1×1, 2×2, 4×4 and 6×6 inch mesh.

How high can a steel matting partition be?

A 4×8 ft sheet stood on end is 2.44 m high, and a 6×20 ft sheet is 1.83 m high. For a taller partition, stack panels in a frame.

Can you cut steel matting to my panel size?

We make custom sheet sizes. Send us the width and height of the panels you need.

Do you make and install the frames?

We make and supply the steel matting. Ask your welder or fabricator for the frames, posts, doors and installation.

See also the steel matting vs deformed bar guide, steel matting sizes, custom steel matting and all steel matting uses.

Send us your panel sizes, we quote the matting

Tell us the panel width and height, the mesh opening, the wire thickness and whether you want black iron or galvanized. We will reply with the price and what is in stock.

Get a Free Quote →
Need steel matting? Una Wire Products Inc. manufactures to standard and custom sizes. Request a free quote →

Where to next?

Ready to order? Get a quote or call (02) 8260-0181.

Viber