Ideas

Wire Mesh Shelf and Rack Ideas in the Philippines: 6 Steel Matting Designs for Storage, Drying and Plants

By Una Wire Products Inc. ·November 2026 ·5 min read
Quick Answer

Can you use steel matting for shelves and racks?
Yes. A matting panel in a frame makes an open shelf that lets air and water through, which suits garage shelves, drying racks, shoe racks and plant benches. Use 2×2 inch mesh in 3.0 to 3.5 mm wire for most shelves, and 1×1 inch where small items would fall through. Add a flat bar or angle edge so the panel stays flat under load. For food that touches the mesh, ask us about stainless steel matting.

Looking for a shelf or rack that does not rot, drains water and lets air through? Steel matting shelves are stiff, easy to wipe and cheaper than most ready-made wire racks. This page shows six rack and shelf ideas, which mesh and wire suit each one, what the matting costs, and what to tell us so we can supply the panels. We make the matting. The frame and welding come from your fabricator, or you build a small rack yourself.

Illustration of four steel matting racks: garage shelf unit, drying rack, wall grid for tools and nursery plant bench
Four ways to use steel matting for shelves and racks (illustration).

6 Steel Matting Shelf and Rack Ideas

1. Garage and storeroom shelf unit

Four posts of angle bar with matting shelves 40 to 50 cm apart. A 4×8 ft sheet (1.22 m × 2.44 m) cuts four shelves of about 0.6 × 1.2 m. Frame each shelf in flat bar or angle, weld or bolt it to the posts, and add a cross brace at the back so the unit does not lean.

2. Drying rack for crops, herbs and fish

A raised, flat rack lets air reach both sides of what you dry, and rain or dew drains through. Make a frame about 80 cm off the ground and lay a matting panel on it. For food that touches the mesh, use stainless steel matting, or line the rack with a clean net or cloth. See our stainless steel matting page.

3. Wall grid for tools and garage

Fix a panel to a wall with spacers and hang tools, hoses and cables from S hooks. Hooks can sit anywhere on the grid, unlike a fixed hook board. Use 2×2 inch mesh in 3.0 mm wire and fix the frame to the masonry every 40 to 50 cm.

4. Shoe rack and entry bench

A low frame with two matting shelves lets dirt fall through and shoes dry. Use 2×2 inch mesh in 2.6 to 3.0 mm wire, and paint or galvanize it for a house entry or a covered porch.

5. Nursery bench and plant stand

A bench about 80 cm high with a matting top drains water and lets air reach the pots. Use galvanized 2×2 inch mesh in 3.0 to 3.5 mm wire, or 4×4 inch for larger pots. The grid also holds hanging pots from S hooks.

6. Kitchen and laundry racks

A wall or counter rack for draining dishes, cooling baked goods or drying clothes. Where food touches the rack, use stainless steel matting. For laundry and utility racks, galvanized 2×2 inch mesh is fine.

Which Mesh and Wire for a Shelf or Rack?

RackMesh openingWireNotes
Garage shelf2×2 inch3.0 – 3.5 mmShelves 40 – 50 cm apart, cross brace
Drying rack2×2 or 1×1 inch2.6 – 3.0 mmStainless where food touches the mesh
Wall grid2×2 inch3.0 mmFix to masonry every 40 – 50 cm
Shoe rack2×2 inch2.6 – 3.0 mmGalvanized or painted
Nursery bench2×2 or 4×4 inch3.0 – 3.5 mmGalvanized, 80 cm high
Kitchen or laundry rack1×1 or 2×2 inch2.6 – 3.0 mmStainless where food touches the mesh

Load capacity depends on the frame, the wire and the span. Ask your fabricator to check a shelf for the weight you need to store. See the wire mesh gauge guide.

What the Matting Costs for Shelves and Racks

Only the matting is priced here. Using our October 2026 pick-up prices for black iron:

RackSheet usedMatting, black ironMatting, galvanized
Four shelves 0.6 × 1.2 m, 2×2 inch, 3.0 mmOne 4×8 ft sheet, cut in four₱450about ₱540 – ₱608
Nursery bench top 1.22 × 2.44 m, 2×2 inch, 3.0 mmOne 4×8 ft sheet₱450about ₱540 – ₱608
Wall grid panel 1.22 × 2.44 m, 2×2 inch, 3.5 mmOne 4×8 ft sheet₱534about ₱641 – ₱721
Small-parts shelf panels, 1×1 inch, 2.6 mmOne 4×8 ft sheet₱1,250Ask for a quote

The frame, posts, fixings, paint or galvanizing and welding labour are extra. Galvanizing adds about 20 to 35%. For stainless steel matting for food racks, send us the size and we will quote it. For other gauges, see the steel matting price list.

Tips for Building a Better Rack

  • Frame every shelf. A matting panel with a flat bar or angle border stays flat and has no sharp cut ends.
  • Keep spans short. A long, lightly framed panel sags under weight. Use thicker wire, a closer frame or a center support for heavy loads.
  • Brace the unit. A diagonal brace at the back, or fixing it to a wall, stops a tall shelf from leaning.
  • Match the finish to the place. Galvanized for damp or outdoor racks, painted black iron for dry indoor use. See galvanized vs black iron.
  • Use stainless for food. Do not lay food straight on painted or black iron mesh.

Frequently Asked Questions

Can steel matting be used for shelves?

Yes. Weld or bolt a steel matting panel into a flat bar or angle frame and fix the frame to posts or a wall.

What wire thickness is best for a shelf?

For most shelves, 2×2 inch mesh in 3.0 to 3.5 mm wire. Use thicker wire or a shorter span for heavy loads.

Can steel matting be used for drying fish or food?

For food that touches the mesh, use stainless steel matting. Ask us for a quote. For other finishes, line the rack with a clean net or cloth.

Can you cut steel matting to the size of my shelf?

We make custom sheet sizes. Send us the width and length of the panels you need.

Do you sell finished racks?

We make and supply the steel matting. Ask your welder or fabricator for the frame and assembly.

See also the stainless steel matting page, thickness chart, custom steel matting and all steel matting uses.

Send us your shelf size, we quote the panels

Tell us the panel width and length, the mesh opening, the wire thickness and whether you want black iron, galvanized or stainless. We will reply with the price and what is in stock.

Get a Free Quote →
Need steel matting? Una Wire Products Inc. manufactures to standard and custom sizes. Request a free quote →

Where to next?

Ready to order? Get a quote or call (02) 8260-0181.

Viber