What steel matting is used for a concrete driveway?
Use 2×2 inch black iron steel matting, 3.5 to 4.5 mm wire, in a slab about 100 to 125 mm thick. A single car driveway of 3 × 6 m (18 m²) needs about 8 sheets of 4×8 ft or 2 sheets of 6×20 ft, including 10% waste. Heavy trucks need a design from your engineer, and we do not claim a load rating for steel matting.
A concrete driveway takes a lot of wear: tyres, turning wheels, sun and rain. Steel matting inside the slab keeps cracks tight, so one crack does not turn into a broken panel. This page covers the mesh, wire and sheet size for a driveway or carport, how many sheets a typical driveway needs, and what the matting costs. The general method is in wire mesh for concrete reinforcement.
Which Steel Matting for a Driveway?
| Driveway | Mesh opening | Wire | Slab thickness |
|---|---|---|---|
| Light car driveway, good ground | 2×2 inch | 3.5 mm | 100 mm |
| Car driveway or carport | 2×2 inch | 3.5 – 4.5 mm | 100 – 125 mm |
| Soft ground, or delivery trucks sometimes | 2×2 inch | 4.5 mm and up | Ask your engineer |
| Heavy trucks, loading bay | Per design | Per design | Your engineer designs it |
Common practice, not a design. Always confirm gauge, slab thickness and any elevated or structural slab with your engineer.
How Many Sheets Does a Driveway Need?
Sheet counts use the net coverage of 2.68 m² for a 4×8 ft sheet and 10.59 m² for a 6×20 ft sheet (after laps), plus 10% for cutting and waste. Black iron 2×2 inch prices are our October 2026 pick-up prices: 3.5 mm is ₱534 per 4×8 and ₱1,871 per 6×20, and 4.5 mm is ₱803 per 4×8 and ₱2,910 per 6×20.
| Driveway | Area | 4×8 sheets | 4×8 cost, 3.5 mm / 4.5 mm | 6×20 sheets | 6×20 cost, 3.5 mm / 4.5 mm |
|---|---|---|---|---|---|
| Single car driveway, 3 × 6 m | 18 m² | 8 | ₱4,272 / ₱6,424 | 2 | ₱3,742 / ₱5,820 |
| Two car driveway, 5.5 × 6 m | 33 m² | 14 | ₱7,476 / ₱11,242 | 4 | ₱7,484 / ₱11,640 |
| Long driveway, 3 × 15 m | 45 m² | 19 | ₱10,146 / ₱15,257 | 5 | ₱9,355 / ₱14,550 |
| Driveway and parking apron, 6 × 10 m | 60 m² | 25 | ₱13,350 / ₱20,075 | 7 | ₱13,097 / ₱20,370 |
Matting only. Delivery, tie wire, chairs, concrete and labour are extra. Narrow driveways cut 6×20 sheets with more waste than the table shows, so ask us for a layout.
Driveway Details That Matter More Than the Mesh
- Base. Compact the soil and a gravel base first. Most driveway failures start with a soft spot under the slab.
- Joints. Cut or form control joints, often into squares of 3 to 4 m, so cracks follow the joint. Steel matting does not replace them.
- Slope. Slope the surface a little away from the house so water runs off to a drain.
- Edges. Edges and entrances take the hardest knocks. Keep the mesh at least 20 mm from the edge and the surface.
- Curing. Keep fresh concrete damp for several days. Slabs that dry too fast crack early.
- Mesh height. Hold the mesh in the slab on chairs. See the install guide.
Black Iron or Galvanized?
Black iron. Concrete protects the mesh inside it, and galvanizing does not help a driveway slab enough to pay for. If you also need a fence or gate at the driveway, that matting stays outdoors and exposed, so galvanized or painted is worth considering. See the gate design ideas and galvanized vs black iron.
Frequently Asked Questions
What steel matting is used for a concrete driveway?
2×2 inch black iron steel matting, usually 3.5 to 4.5 mm wire, in a 100 to 125 mm slab. Heavy trucks need a design from your engineer. Always confirm gauge, slab thickness and any elevated or structural slab with your engineer.
How thick should a concrete driveway be?
A residential driveway for cars is usually 100 to 125 mm thick. Your engineer or contractor sets the final thickness for your soil and use.
Is 3.5 mm or 4.5 mm better for a driveway?
3.5 mm is a common spec for a car driveway on good compacted ground. 4.5 mm is the stronger choice for a carport, a soft base or a place where delivery trucks will drive.
Do I need galvanized steel matting for a driveway?
No. Black iron is normal because the concrete covers the mesh. Keep at least 20 mm of cover so rain and ground moisture do not reach the wire.
Does a driveway still crack with steel matting?
It may still crack. The mesh keeps cracks tight, and control joints, a compacted base and proper curing decide where and how much it cracks.
See also steel matting for a floor slab, slab cost by area, sizes and the price list.
Send us your driveway size, we quote the sheets
Tell us the length and width of the driveway, the wire thickness or slab thickness your engineer or contractor specified, and your delivery address. We will reply with the sheet count and price.
Get a Free Quote →