Price Guide

Steel Matting Cost for a Concrete Slab in the Philippines: 20 to 200 m² Examples

By Una Wire Products Inc. ·November 2026 ·5 min read
Quick Answer

How much does steel matting cost for a concrete slab?
For a 100 m² slab in 2×2 inch, 3.5 mm black iron matting, you need 42 sheets of 4×8 ft (about ₱22,428) or 11 sheets of 6×20 ft (about ₱20,581), including 10% waste. As a rule of thumb that is about ₱177 to ₱199 per m² of slab. Prices are our October 2026 pick-up prices, matting only.

If you are budgeting a floor or driveway, the first number to know is the cost of the mesh. This page works it out for slab areas from 20 to 200 m², so you can read your own area straight off the table. For the full formula and a calculator, see how to calculate steel matting quantity.

Illustration of how to work out steel matting cost for a slab: measure the area, divide by sheet coverage, add 10 percent waste and multiply by price
How to work out steel matting cost for a slab (illustration).

How We Worked It Out

  1. Area. Length × width of the slab in m².
  2. Add 10% for cutting and waste.
  3. Divide by net coverage. 2.68 m² for a 4×8 ft sheet and 10.59 m² for a 6×20 ft sheet, after laps. Round up.
  4. Multiply by the price per sheet.

Cost by Slab Area: 3.5 mm, 2×2 inch, Black Iron

3.5 mm is the common house floor spec. Prices: ₱534 per 4×8 sheet and ₱1,871 per 6×20 sheet.

Slab area4×8 sheets4×8 cost6×20 sheets6×20 cost
20 m²9₱4,8063₱5,613
30 m²13₱6,9424₱7,484
50 m²21₱11,2146₱11,226
75 m²31₱16,5548₱14,968
100 m²42₱22,42811₱20,581
150 m²62₱33,10816₱29,936
200 m²83₱44,32221₱39,291

Cost by Slab Area: 4.5 mm, 2×2 inch, Black Iron

4.5 mm is the stronger spec for driveways, garages and shop floors. Prices: ₱803 per 4×8 sheet and ₱2,910 per 6×20 sheet.

Slab area4×8 sheets4×8 cost6×20 sheets6×20 cost
50 m²21₱16,8636₱17,460
100 m²42₱33,72611₱32,010
200 m²83₱66,64921₱61,110

Per square meter of slab, 3.5 mm works out to about ₱177 (6×20) to ₱199 (4×8), and 4.5 mm to about ₱275 to ₱300. For a double layer, double the figures. Other gauges are on the price list.

4×8 or 6×20 for the Budget?

  • Under about 30 m². 4×8 ft sheets. Less waste, easy to carry, and a 6×20 sheet is more than you need.
  • 30 to 50 m². Compare both. Ask us for the layout.
  • Over 50 m². 6×20 ft sheets usually cost less per m² and need fewer laps and less tying.

What Is Not in These Numbers

  • Delivery to your site.
  • Tie wire. See tie wire per roll.
  • Chairs or spacers, usually a few pieces per m².
  • Cutting and fixing labour, and the concrete.
  • A second layer, if your engineer asks for one.

Frequently Asked Questions

How much does steel matting cost for a 100 m² slab?

With 3.5 mm wire, 2×2 inch, black iron, about ₱22,428 using 42 sheets of 4×8 ft, or about ₱20,581 using 11 sheets of 6×20 ft. That is matting only, at our October 2026 pick-up prices.

Is 6×20 ft cheaper than 4×8 ft?

Per square meter it is lower. For 3.5 mm that is about ₱177 per m² net for 6×20 and ₱199 per m² for 4×8. A small area can still be better in 4×8 sheets because there is less waste.

How many sheets of steel matting do I need per square meter?

One 4×8 ft sheet covers about 2.68 m² after laps, so about 0.37 sheets per m². One 6×20 ft sheet covers about 10.59 m², so about 0.09 sheets per m². Add 10% for waste.

Does the price include delivery?

No. These are pick-up prices for the matting only. Ask us for delivery to your address.

What else do I pay for besides the matting?

Tie wire, wire chairs or spacers, cutting and fixing labour, delivery, and the concrete itself.

See also floor slab guide, driveway guide, sizes and the budget calculator.

Send us your slab area, we quote it

Tell us the area, the wire thickness, the sheet size you prefer and your delivery address. We will reply with the sheet count, the price and what is in stock.

Get a Free Quote →
Need steel matting? Una Wire Products Inc. manufactures to standard and custom sizes. Request a free quote →

Where to next?

Ready to order? Get a quote or call (02) 8260-0181.

Viber