Ideas

Pigpen and Livestock Pen Design in the Philippines: 6 Wire Mesh Pens for Pigs, Goats, Poultry and Calves

By Una Wire Products Inc. ·November 2026 ·5 min read
Quick Answer

Can you make pens for pigs and livestock from steel matting?
Yes, for backyard and small farms. Steel matting panels in a galvanized pipe frame make pen walls, dividers and gates that keep animals in and hose clean. Use 4×4 inch mesh in 3.0 to 3.5 mm wire for pigs and goats, and galvanized panels and frames because pens stay wet. Large animals such as cattle and big hogs need strong pipe rails, with the mesh as infill.

Looking for a pen design that is strong, ventilated and easy to wash? Welded wire panels in a pipe frame are a common choice for backyard piggeries and small farms: they let air through in the heat and wash down quickly. This page shows six pen ideas, which mesh and wire suit each one, what the matting costs, and what to tell us so we can supply the panels. We make the matting. The pipe frames, posts and gates come from your welder. For farm gates, see our gate design ideas.

Illustration of four steel matting pens: hog pen divider panels, goat pen with roof, poultry range with skirt and quarantine pen
Four steel matting pen designs for a small farm (illustration).

6 Steel Matting Pen Ideas for Small Farms

1. Hog pen divider panels

Panels about 1.0 to 1.2 m high between pens. A 4×8 ft sheet (1.22 m × 2.44 m) makes one panel 1.22 m high and 2.44 m long. Frame each panel in galvanized pipe and bolt it to posts set in concrete. Use 3.0 to 3.5 mm wire, or heavier for big hogs, because pigs push and lean on panels.

2. Grower and finisher pen

A pen with mesh walls on a concrete floor sloped to a drain. The mesh lets air through in hot weather and keeps the pen visible for checking animals. Use a strong pipe rail at the top and bottom of every panel, and heavier wire where animals lean.

3. Goat and sheep pen

Walls at least 1.2 m high with 4×4 inch mesh in 3.0 to 3.5 mm wire. Goats climb and jump, so keep the top level and the mesh tight, and give them a roof for shade and rain. A raised, slatted floor keeps the pen dry.

4. Poultry and duck range

A fenced run for free-range chickens or ducks about 1.8 m high, with a mesh roof or an overhang to keep out predators. Use 2×2 inch mesh in 2.6 mm wire and a skirt of mesh laid flat on the ground so animals cannot dig under. See our animal cage ideas.

5. Quarantine and sick pen

A small, separate pen away from the herd with its own feed and water. Galvanized pipe and mesh wash and disinfect easily, and the mesh keeps the sick animal visible.

6. Temporary field panels

Panels clipped or bolted together make a movable pen for a grazing area, a loading point or an event. Keep the panels to 1.22 m high and 2.44 m long, so two people can move them.

Which Mesh and Wire for a Pen?

PenMesh openingWireNotes
Hog pen divider4×4 inch3.0 – 3.5 mmPipe frame, posts in concrete
Grower and finisher walls4×4 inch3.5 mm or heavierStrong top and bottom rails
Goat pen4×4 inch3.0 – 3.5 mmAt least 1.2 m high, with roof
Poultry and duck range2×2 inch2.6 mmSkirt and roof against predators
Quarantine pen4×4 inch3.0 mmGalvanized, easy to disinfect
Temporary panels4×4 inch3.0 mmClip or bolt together

These are design suggestions. Animal strength and the space each animal needs vary. Check pen size and layout with your vet, farm technician or local agriculture office. See the wire mesh gauge guide.

What the Matting Costs for a Pen

Only the matting is priced here. Using our October 2026 pick-up prices for black iron (the 4×4 inch sheets start at the lightest gauge):

PenSheets usedMatting, black ironMatting, galvanized
Four hog pen divider panels, 4×4 inch, 2.6 mmFour 4×8 ft sheetsfrom ₱1,800about ₱2,160 – ₱2,430
Four hog pen divider panels, 4×4 inch, 4.5 mmFour 4×8 ft sheets₱3,800about ₱4,560 – ₱5,130
Goat pen 3 × 4 m, 1.22 m high, 4×4 inch, 2.6 mmSix 4×8 ft sheetsfrom ₱2,700about ₱3,240 – ₱3,645
Poultry range 2 × 3 m, 1.83 m high, no roof, 2×2 inch, 2.6 mmTwo 6×20 ft sheets, cut₱2,244about ₱2,693 – ₱3,029

Pipe frames, posts, concrete, gates, roofing, feeders and labour are extra. Galvanizing adds about 20 to 35%. For other gauges, see the steel matting price list.

Tips for a Better Pen

  • Use galvanized for pens. Pens are wet and dirty all year, and black iron rusts quickly. See galvanized vs black iron.
  • Frame every panel. A pipe frame on all four sides stops animals from bending or pushing the mesh out of shape.
  • Set posts in concrete. Animals lean on pen walls all day.
  • Slope the floor. Slope to a drain so the pen washes out and stays dry.
  • Smooth every edge. Border cut ends with pipe or flat bar so animals do not cut themselves.

Frequently Asked Questions

Can steel matting be used for a pigpen?

Yes, for backyard and small farm pens. Frame steel matting panels in galvanized pipe and fix them to posts in concrete.

What mesh size is best for a goat pen?

4×4 inch mesh in 3.0 to 3.5 mm wire, at least 1.2 m high, with a roof for shade.

Should a livestock pen be galvanized or black iron?

Galvanized. Pens stay wet and black iron rusts quickly. If you use black iron, paint it and repaint when the paint wears off.

Can you cut steel matting to the size of my pen?

We make custom sheet sizes. Send us the width and height of the panels you need.

Do you make the pipe frames and gates?

We make and supply the steel matting. Ask your welder for the frames, gates and installation.

See also gate design ideas (including farm gates), animal cage ideas, steel matting fence guide and all steel matting uses.

Send us your pen size, we quote the panels

Tell us the pen size, the animal, the mesh opening, the wire thickness and whether you want black iron or galvanized. We will reply with the price and what is in stock.

Get a Free Quote →
Need steel matting? Una Wire Products Inc. manufactures to standard and custom sizes. Request a free quote →

Where to next?

Ready to order? Get a quote or call (02) 8260-0181.

Viber