Specs

Steel Matting Weight per Sheet in the Philippines: 4×8 ft and 6×20 ft by Wire Size

By Una Wire Products Inc. ·November 2026 ·4 min read
Quick Answer

How much does steel matting weigh per sheet?
A 4×8 ft sheet of 2×2 inch, 3.5 mm matting weighs about 9 kg, and a 6×20 ft sheet about 34 kg. In 4.5 mm wire they are about 14.5 kg and 56 kg. Weight rises quickly with wire size, because doubling the diameter makes a wire about four times heavier. The figures here are calculated, not weighed.

Before you order, it helps to know what a sheet weighs: for the delivery truck, for how many people carry a sheet, and for how much steel is going into the slab. This page gives the approximate weight of each standard sheet size and wire thickness. The prices are on the price list, and the wire sizes on the thickness chart.

Illustration of steel matting sheet weights: 4×8 ft and 6×20 ft sheets by wire size
Approximate steel matting weight per sheet (illustration).

Weight per Sheet, 2×2 inch Mesh, 4×8 ft (1.22 × 2.44 m)

WireApprox. weight per sheetWeight per m²
2.6 mm≈ 5 kg1.6 kg
3 mm≈ 6.5 kg2.2 kg
3.5 mm≈ 9 kg3.0 kg
4.5 mm≈ 14.5 kg4.9 kg
5.5 mm≈ 22 kg7.3 kg
6 mm≈ 26 kg8.7 kg

Weight per Sheet, 2×2 inch Mesh, 6×20 ft (1.83 × 6 m)

WireApprox. weight per sheetWeight per m²
2.6 mm≈ 19 kg1.7 kg
3.5 mm≈ 34 kg3.0 kg
4.5 mm≈ 56 kg5.0 kg
5.5 mm≈ 83 kg7.5 kg
6 mm≈ 99 kg8.9 kg

4×4 and 6×6 inch Mesh

Wider mesh uses fewer wires, so a sheet is much lighter at the same wire size:

Mesh openingWire4×8 ft sheet6×20 ft sheet
4×4 inch3.5 mm≈ 4.5 kg≈ 17 kg
4×4 inch4.5 mm≈ 7.5 kg≈ 28 kg
6×6 inch2.6 mm≈ 1.5 kg≈ 6 kg
6×6 inch3.5 mm≈ 3 kg≈ 12 kg

Calculated from the nominal wire diameter, the wire length in the sheet and steel at 7,850 kg/m³. Real sheets vary slightly with wire tolerance and cutting. Confirm weight for a truck load before you order.

What the Weight Means on Site

  • Carrying. A 3.5 mm 4×8 ft sheet is about 9 kg, easy for two people. A 6×20 ft sheet is 34 kg or more and needs a team, or a crane or loader for heavy wire.
  • Delivery. A 100 m² slab in 3.5 mm needs about 42 sheets of 4×8 ft, around 378 kg in all, or 11 sheets of 6×20 ft, around 374 kg. Tell us the load and your address so we can plan the delivery.
  • Heavier wire. 5.5 mm and 6.0 mm sheets weigh around 22 to 26 kg in 4×8 ft. Plan the handling, not just the price.
  • Slab steel. 3.5 mm matting is about 3.0 kg of steel per m² of sheet, before laps.

Frequently Asked Questions

How much does a sheet of steel matting weigh?

A 4×8 ft sheet of 2×2 inch matting weighs about 5 kg in 2.6 mm wire, 9 kg in 3.5 mm and 14.5 kg in 4.5 mm. A 6×20 ft sheet is about 34 kg in 3.5 mm. These are calculated from the wire size, so real sheets vary a little.

How do you work out the weight of steel matting?

Add up the length of all the wires in the sheet, multiply by the cross-section area of the wire, then by the density of steel, 7,850 kg per m³. The table does this for each size.

How heavy is steel matting per square meter?

For 2×2 inch matting, about 1.6 kg per m² in 2.6 mm, 3.0 kg in 3.5 mm and 4.9 kg in 4.5 mm.

Why does the weight matter when I order?

It tells you what vehicle you need, how many people to carry a sheet, and how much steel is going into the slab.

Is the weight on this page exact?

No. It is a calculation from the nominal wire diameter. Actual wire is slightly different, and welds, cuts and coatings add or remove a little. Treat it as a planning figure.

See also slab cost, sizes and how to install steel matting.

Planning a delivery? Send us the sheet list

Tell us the mesh, wire thickness, number of sheets and your delivery address. We will reply with the price and the delivery plan.

Get a Free Quote →
Need steel matting? Una Wire Products Inc. manufactures to standard and custom sizes. Request a free quote →

Where to next?

Ready to order? Get a quote or call (02) 8260-0181.

Viber