How much is galvanized steel matting in the Philippines?
Hot-dip galvanizing a finished black iron sheet adds about 20 to 35% to the price. A 2×2 inch, 4×8 ft sheet that is ₱318 to ₱1,650 in black iron (October 2026) works out to roughly ₱380 to ₱2,230 galvanized, depending on wire thickness. "G.I. matting" woven from galvanized wire is a different, finer product at ₱1,250 to ₱8,150 per 4×8 sheet.
People search for galvanized steel matting and "GI steel matting" as if they were one product. At the factory they are two, with very different prices. This page separates them, shows what each costs per sheet, and explains when galvanized is worth paying for over black iron.
Two Products Called "Galvanized Steel Matting"
| Galvanized construction matting | G.I. matting (woven wire) | |
|---|---|---|
| What it is | The same welded matting as black iron, hot-dip galvanized after it is made | A finer mesh made from drawn galvanized (G.I.) wire, sized by gauge number |
| Price | Black iron price plus about 20 to 35% | Priced well above black iron, several times more than construction matting of the same nominal gauge |
| Used for | Outdoor fencing, coastal and wet areas, rooftop structures, drainage covers | Cages, aviaries and architectural screens |
Galvanized Construction Matting: Estimated Price per Sheet
We price galvanized construction matting from the black iron list. The table applies the 20 to 35% galvanizing premium to our October 2026 black iron prices for the common 2×2 inch mesh. Treat the galvanized column as an estimate, and confirm the exact figure in a quote.
| Wire thickness | Black iron, 4×8 ft | Galvanized, 4×8 ft (estimate) |
|---|---|---|
| 2.6 mm | ₱318 | ₱382 – ₱429 |
| 3.0 mm (#8) | ₱450 | ₱540 – ₱608 |
| 3.5 mm | ₱534 | ₱641 – ₱721 |
| 4.5 mm (#6) | ₱803 | ₱964 – ₱1,084 |
| 5.5 mm | ₱1,122 | ₱1,346 – ₱1,515 |
| 6.0 mm (¼ inch) | ₱1,650 | ₱1,980 – ₱2,228 |
For the large 6×20 ft sheet (6 ft × 6 m) in 2×2 inch mesh:
| Wire thickness | Black iron, 6×20 ft | Galvanized, 6×20 ft (estimate) |
|---|---|---|
| 2.6 mm | ₱1,122 | ₱1,346 – ₱1,515 |
| 3.5 mm | ₱1,871 | ₱2,245 – ₱2,526 |
| 4.5 mm (#6) | ₱2,910 | ₱3,492 – ₱3,929 |
| 5.5 mm | ₱4,238 | ₱5,086 – ₱5,721 |
| 6.0 mm (¼ inch) | ₱5,450 | ₱6,540 – ₱7,358 |
Black iron prices are per sheet, pick-up at our Quezon City factory, October 2026. Galvanized figures are black iron plus 20 to 35% and are estimates. Not every thickness is always in stock, so call (02) 8260-0181 to confirm. Freight, spacers and tie wire are extra.
G.I. Matting (Woven Galvanized Wire) Price
G.I. matting uses drawn galvanized wire sized by gauge number, and is a finer, more corrosion-resistant product than plain construction matting. Prices per 4×8 ft sheet, October 2026:
| Mesh opening | Wire gauge | Price per sheet |
|---|---|---|
| 2×2 inch | G.I. #12 to #4 | ₱1,250 – ₱8,150 |
| 1×1 inch | G.I. #12 to #10 | ₱2,850 – ₱3,750 |
Lighter electro-galvanized 2×2 inch sheets in 2.4 mm wire, 4×8 ft, start at about ₱550.
Hot-Dip or Electro-Galvanized?
Hot-dip galvanizing dips the wire or finished sheet in molten zinc, which gives a thicker, more durable coating and is preferred for outdoor use. Electro-galvanizing applies a thinner, smoother coat electrically and costs less. When you compare quotes, ask which one you are being offered, because two "galvanized" sheets of the same size can have very different coatings.
Is Galvanized Worth the Extra Cost?
- Outdoor or wet use: yes. Fences, coastal sites, rooftop structures, drainage covers and agricultural enclosures. In the Philippine climate galvanized matting typically lasts about 10 to 20 years outdoors.
- Buried in concrete: usually no. Most residential slabs use black iron, because the concrete protects it from moisture. See galvanized vs black iron steel matting for how to decide.
- Food, pharmaceutical or marine use: neither black iron nor galvanized is the right answer. Ask about stainless steel matting, which we quote per order.
Frequently Asked Questions
How much is galvanized steel matting per sheet?
For a 2×2 inch, 4×8 ft sheet, galvanized construction matting is roughly ₱380 to ₱2,230 depending on wire thickness, which is the black iron price plus about 20 to 35% (October 2026, estimate). For example, 3.5 mm wire is about ₱641 to ₱721 galvanized against ₱534 in black iron.
How much more is galvanized than black iron steel matting?
Hot-dip galvanizing a finished black iron sheet adds roughly 20 to 35% to the price for outdoor corrosion protection.
Is GI steel matting the same as galvanized steel matting?
Not always. Galvanized construction matting is black iron matting that is galvanized after it is made. G.I. matting is a finer product woven from drawn galvanized wire, used for cages, aviaries and screens, and it costs several times more. A 2×2 inch G.I. sheet in 4×8 ft is ₱1,250 to ₱8,150 depending on gauge.
How long does galvanized steel matting last outdoors?
In the Philippine climate, about 10 to 20 years, depending on the coating, the environment and how close the site is to the sea. Coastal and constantly wet sites sit at the shorter end.
Should I use galvanized or black iron steel matting for a fence?
Use galvanized for a fence or anything exposed to rain and humidity. Plain black iron rusts outdoors unless it is painted, and it is meant to be buried in concrete.
What does galvanized steel matting cost in a 6×20 ft sheet?
A 6×20 ft sheet in 2×2 inch mesh and 3.5 mm wire is ₱1,871 in black iron, so about ₱2,245 to ₱2,526 galvanized (estimate, October 2026). Heavier wire costs more, up to about ₱6,540 to ₱7,358 for 6.0 mm.
See also the full steel matting price list and the thickness chart (#8, #6, ¼ inch in mm).
Get an exact price for galvanized matting
Tell us the sheet size, mesh opening, wire thickness, whether you want hot-dip or electro-galvanized, and how many sheets. We'll reply with the exact price and what is in stock.
Get a Free Quote →